成人论坛

Electrolysis and extraction of aluminiumExtracting aluminium

Electrolysis involves using electricity to break down electrolytes to form elements. The products of electrolysis can be predicted for a given electrolyte. Aluminium is one metal which is extracted from its ore by this method.

Part of Chemistry (Single Science)Metals and their extraction

Extracting aluminium

Aluminium is the most metal on Earth, but it is expensive, largely because of the amount of electricity used in the extraction process.

Aluminium is called bauxite (Al2O3). The bauxite is to yield a white powder 鈥 aluminium oxide (also known as alumina) 鈥 from which aluminium can be extracted.

The extraction is done by , but first the aluminium oxide must be melted so that electricity can pass through it. However, aluminium oxide has a very high melting point (over 2,000掳C) so it would be expensive to melt it.

Instead, it is in cryolite 鈥 an aluminium compound with a lower melting point than aluminium oxide. The use of molten cryolite as a reduces some of the energy costs involved in extracting aluminium by allowing the ions in aluminium oxide to move freely at a lower temperature.

A steel case is lined with a graphite cathode and filled with purified aluminium ore dissolved in molten cryolite. Graphite anodes are inserted and molten aluminium is drawn off from the bottom.

The diagram shows an aluminium oxide electrolysis cell. Both the negative (cathode) and positive electrode (anode) are made of graphite, which is a form of carbon.

Aluminium receive at the negative electrode and are to aluminium :

Al3+ + 3e 鈫 Al (reduction 鈥 gain electrons)

The molten aluminium sinks to the bottom of the cell, where it is tapped off.

Oxide ions lose electrons at the positive electrodes and are oxidised to oxygen gas:

2O2鈥 鈫 O2 + 4e (oxidation 鈥 lose electrons)

This oxygen reacts with the carbon of the positive electrodes, forming carbon dioxide, so they gradually burn away. As a result, the positive electrodes have to be replaced frequently. This adds to the cost of the process.

Choice of aluminium extraction site

There are a number of important factors to consider when choosing the site of an aluminium extraction plant. It should be:

  • in close proximity to a power station, in order to provide the large supply of electricity needed for the electrolysis
  • near the coast to allow for the import of raw materials
  • near roads and railway lines to allow for the product to be taken to where it is needed
  • near a town or city, so that workers have somewhere to live close by
  • away from built-up areas, so that the noise and pollution of the site do not affect the local population

Anglesey, in north Wales, was chosen as a suitable site for an aluminium extraction plant. However, this plant was shut down in 2013 after the nearby power station was decommissioned.